24
Setup PW parameter in the Calibration Parameters section in this chapter to enable or
disable this feature.
Working with the Setup Mode
When in the setup mode, the navigation pushbuttons will input selections and navigate
through the setup mode menu. The current parameter is displayed on the first line of the
secondary display. The current parameter value is displayed on the primary display. The
second line of the secondary display provides a navigation pushbutton guide for the setup
mode.
To select a parameter value, press the UNITS (
) or PRINT (
) pushbuttons to scroll
through the possible selections for that particular parameter. The parameter value can be
saved once the desired parameter is displayed on the primary display. To save the
desired value press GROSS/NET (
) or TARE (
). This advances the indicator to the
next parameter, confirming your selection. Once MENU is pressed, the setup mode is
exited and the secondary display reads SAVING DATA to confirm that the parameter
changes have been saved.
Figure 4.1 Menu Navigation
Summary of Contents for GuardianXL
