Doran GuardianXL, Installation And Instruction Manual

Page: 48 / 87

47
Auto Zero Thresh
The auto zero tracking threshold parameter allows for automatic zeroing of the
displayed weight when small amounts of product remains on the weighing
platform. The unit of this setting is divisions. Therefore a scale calibrated to 500
x 0.1 lb capacity and resolution would have 0.1 lb as one division. AZT should
be turned off when light amounts of weight – 1 to 2 divisions of scale capacity is
weighed.
0.5
1.0 Not available when Legal for Trade is set to HB44.
2.0 Not available when Legal for Trade is set to HB44.
3.0 Not available when Legal for Trade is set to HB44.
5.0 Not available when Legal for Trade is set to HB44.
Off Auto zero is disabled.
Motion Threshold
The motion threshold controls the motion indicator when in weighing mode.
The unit of this setting is divisions. Therefore a scale calibrated to 500 x 0.1 lb
capacity and resolution would have 0.1 lb as one division. The motion indicator
is activated when the
GuardianXL detects scale platform motion over the
threshold setting. This setting must be configured properly when in a Legal for
Trade application.
1.0 One scale division. Legal for Trade Class III or Class III L.
2.0 Two scale divisions. Legal for Trade Class III L only.
3.0 Three scale divisions. Legal for Trade Class III L only.
5.0
Five scale divisions. Not available when Legal for Trade is set to
HB44.
10 Ten scale divisions. Not available when Legal for Trade is set to HB44.
Legal For Trade
This setting auto configures the scale indicator for legal for trade settings as
required by NCWM in the U.S.
Off
HB44
Modifies the following parameters:
Start Up Zero parameter on and modifies its’ behavior to comply with
Handbook 44.
The zero range is limited to ± 10% of scale capacity.
Auto Zero Thresh – 0.5
Motion Threshold – 1.0