Doran GuardianXL, Installation And Instruction Manual

Page: 24 / 87

23
Allows for the recall and setting of setpoint values.
Allows for recall and configuration of scale ID values.
Allows for recall of gross and net accumulator values.
Enters the setup menu at communications parameters.
Enters the setup menu at batch programming.
Enters the setup menu at the date time parameters.
Enters the test menu at the Test Option parameters.
Enters the setup menu at setpoint and I/O configuration parameters.
Enters the calibration menu. Calibration is described in Chapter 5.
Setup Mode Pass Code Protection
It is possible to protect the setup mode with a pass code to prevent accidental entry and
configuration changes.
If enabled, the pass code must be entered after pressing MENU and a shortcut
pushbutton. The secondary display will then read ACCESS SETUP MD ENTER PASS
CODE. Enter 2580 and the
GuardianXL will enter the setup mode. The pass code will
be echoed to the primary display to provide confirmation of pushbutton presses. If any
error occurs while entering the pass code, simply re-enter the pass code.
It is possible that your DORAN distributor has changed the pass code or has enabled the
sealed pushbutton located on the inside of the
GuardianXL housing. If the standard code
does not work contact you local DORAN distributor for service needs. See the Enable