Doran GuardianXL, Installation And Instruction Manual

Page: 56 / 87

55
Chapter 7 Batch Programs
The standard batch programs do not require learning a batch language. Simply select one
of the batch programs below to begin operating. When a batch program is selected,
setpoint and function triggers will be automatically configured. Batch mode and a state
machine will be activated to control the steps of the batch program.
Each batch program can be modified to achieve alternate operations. Due to space
limitations only typical modifications to standard batch programs are shown below. If
one of the following batch programs or modifications does not meet your needs, contact
Doran Scales Technical Support Staff at 800-262-6844 for assistance with batch program
modification.
Standard Batch Program Modification
The standard batch programs below include the most common applications. Standard
batch programs can be modified by altering the Setpoint Output and I/O Function
Parameters described in Chapter 4. The batch control parameters that affect the operation
of the batch program are as follows:
Batch Program
Batch Step
Batch Step Chang(e)
Batch Delay
Batch Cfg F1/F2
Batch Delay Time
All other output or function parameters affect the individual output or function, not how
the entire batch program operates.
When the Batch Program parameter is changed, the entire configuration of the Setpoint
Output and I/O Function Parameters is defaulted to one of the standard batch programs.
Once this batch program is loaded into memory, the Setpoint Output and I/O Function
Parameters can be modified to achieve a custom batch program. Each of the programs
below has a few program alterations listed.