15
Adjusting the shutdown points (points 2, 4 and 6)
1.-
After accessing the adjustment mode, use buttons
to select
the day of the week to be programmed and press
to confirm.
2.-
The digit of the programming points will flash. Use buttons
to
select the desired shutdown point (2, 4 or 6) and press
to confirm.
3.-
The digits of the time will flash. Use buttons
to select the
desired off time and press
to confirm.
4.-
The digits of the minutes will flash. Use buttons
to select the
minutes and press
to confirm.
5.-
The symbol will flash. Press
to activate the adjusted shutdown
point. The symbol
will stop flashing and will remain still,
indicating that it is enabled.
6.-
Once the shutdown point is turned on, press
to and repeat the
process from step 1 to adjust more points.
If you wish to deactivate a previously activated shutdown point, select the point you wish to
deactivate (Step 2), press
to advance through the adjustment mode until the fixed
programming symbol
(Step 5) is displayed, and finally, press
to disable the shutdown point.
The symbol
will flash, indicating that it is disabled. Press
again to keep adjusting the
programmer.
After adjusting all desired programming points, press
to exit the adjustment mode.
NOTE: Each time the timer reaches at a shutdown point (2, 4 and 6), all operating modes that
are active at that moment will be deactivated (total shutdown of the heat pump).
Summary of Contents for DUAL CLIMA 11
