DUAL CLIMA
14
Adjusting the start points (points 1, 3 and 5)
1.-
After accessing the adjustment mode, use buttons
to select
the day of the week to be programmed and press
to confirm.
2.-
The digit of the programming points will flash. Use buttons
to
select the desired start point (1, 3 or 5) and press
to confirm.
3.-
The digits of the time will flash. Use buttons
to select the
desired on time and press
to confirm.
4. The digits of the minutes will flash. Use buttons
to select the
minutes and press
to confirm.
5.-
The operating mode symbol
will flash. Use buttons
to
select the operating mode to be switched on and press
to
confirm.
6.-
The symbol will flash. Press
to activate the adjusted start point.
The symbol
will stop flashing and will remain still, indicating that
it is enabled.
7.-
Once the start point is turned on, press
to and repeat the process
from step 1 to adjust more points.
If you wish to deactivate a previously activated start point, select the point you wish to deactivate
(Step 2), press
to advance through the adjustment mode until the fixed programming symbol
(Step 6) is displayed, and finally, press
to disable the start point. The symbol
will flash,
indicating that it is disabled. Press
again to keep adjusting the programmer.
After adjusting all desired programming points, press
to exit the adjustment mode.
Summary of Contents for DUAL CLIMA 11
