User Information
Load-bearing tower Staxo 40
General remarks
69
999805002 - 09/2018
Forming downstand beams
This spindle adapter has been specially designed for
use in forming downstand beams.
▪
Can be mounted onto both types of Multi-purpose
waling: WS10 and WU12.
▪
Because they are fixed onto multi-purpose walings
(whose length can be selected), a variable adjusting
range is possible.
▪
Allow exact lining-and-levelling.
▪
No doubling-up required.
Practical example
Mounting the Staxo 40 spindle
adapter
Example on Multi-purpose waling WS10 Top50
➤
Insert the Staxo 40 spindle adapter into the waling-
gap of the Multi-purpose waling WS10.
➤
Move it to the desired position and fix it on firmly with
the wedge.
A
Staxo 40 spindle adapter
B
Staxo 40 screw jack U-head 30cm
C
Staxo
40 frames
D
Multi-purpose waling WS10
Top50
E
Staxo 40 4-way screw-jack head 70cm
F
Bracing
TR1009-201-02
A
A
A
A
TR1009-201-01
A
D
C
E
B
F
NOTICE
▪
It must be ensured – in every single case –
that the screwjack U-heads are restrained in
both directions.
This may be achieved by way of:
- contact to the structure
- nailed-down floor-slab formwork
- Bracing
▪
Non-restrained screw-jack heads are not
permitted.
▪
In the transverse direction of the multi-pur-
pose waling (torsion of waling), bracing is
absolutely essential!
▪
The multi-purpose waling, the screw-jack
and the load-bearing tower must be stati-
cally dimensioned as stipulated in this User
Information booklet.
NOTICE
➤
Do not oil or grease wedge-clamped joints.
A
Staxo 40 spindle adapter
B
Staxo 40 screw jack U-head 30cm
C
Staxo
40 frame
D
Multi-purpose waling WS10
Top50
G
Anti-twist lock (prevents the Staxo 40 spindle adapter from being
turned out of position)
TR1009-202-01
A
B
D
C
G
