Doka Staxo 40 Instructions For Assembly And Use Download Page 44

Page: 44 / 92

999805002 - 09/2018

Assembling towers in the upright

User Information

Load-bearing tower Staxo 40

Assembling in the upright with 'move-up' front and side railings

As a rule:

▪

Slide the diagonal cross onto the safety-catch bolt

and immediately secure it with the safety catch.

Installation example with Staxo 40 screw-jack foot

30cm and Staxo 40 4-way screw-jack head 30cm.

Erecting the first storey

➤

Insert screwjack base units.

➤

Link the frames with diagonal crosses.

Mounting the scaffold planking units

➤

Insert scaffold planking units.

➤

Close the anti-liftout guard.

Mounting the 'move-up' railings

➤

Mount the Staxo side railings.

Close-up of how to hang into place

NOTICE

▪

Erect the load-bearing tower in the vertical

on ground that is statically capable of sup-

porting the load.

▪

If the load-bearing tower is over 6

m high,

back-stay it or combine it with other towers.

Diagonal cross

98024-270-01

98024-314-01

98024-313-01

Scaffold planking 30/...cm

Staxo side railing

980 - -01

24 316

98024-295-01

980 - -01

24 315

98024-326-01

Summary of Contents for Staxo 40





























































































Search results

Summary of Contents for Staxo 40

Reviews:

Related manuals for Staxo 40

Brands by name

Popular brands

Doka Staxo 40, Instructions For Assembly And Use

Search results

Summary of Contents for Staxo 40

Reviews:

Related manuals for Staxo 40

Brands by name

Popular brands