DMP Electronics 734N-WIFI, Installation And Programming Manual

Page: 8 / 44

4 734N-WIFI Installation and Programming Guide | Digital Monitoring Products, Inc.
INSTALL THE 734N-WIFI
The 734N-WIFI comes in a high-impact plastic housing that you can mount directly to a
wall, backboard, or other flat surface.
For easy installation, the back and ends of the 734N-WIFI housing have wire entrances.
The back also contains multiple screw holes that allow you to mount the 734N-WIFI
on a single-gang switch box. DMP recommends mounting the 734N-WIFI near the
protected door.
You can also mount the 734N-WIFI in a panel enclosure by following these steps:
1. Remove the 734N-WIFI PCB from the plastic housing.
2. Mount the plastic standoffs to the panel enclosure by pressing them into place.
3. Snap the 734N-WIFI onto the standoffs.
1
MOUNT THE 734N-WIFI