DMP Electronics 734N-WIFI, Installation And Programming Manual

Page: 32 / 44

28 734N-WIFI Installation and Programming Guide | Digital Monitoring Products, Inc.
Press the second select key or area to choose SITE (Accept
Site Code) — Door access is granted when the Wiegand site
code string received matches any site code programmed at
SITE CODE 1-8. For details refer back to the REQUIRE SITE
CODE option.
Press the third select key or area to choose
ANY (Any
Wiegand Read) — Access is granted when any Wiegand
string is received.
Press the fourth select key or area to choose
ON (Relay
Always On) — The relay is always on.
Press the CMD key to display the next action.
Press the first select key or area to choose
LAST (Keep Last
State) — The relay remains in the same state and does not
change when communication is lost.
REMOVE KEYPAD
The REMOVE KEYPAD option continually displays with
no time out while the keypad remains connected to the
734N-WIFI module after programming is finished. After
five seconds the 734N-WIFI module piezo continually
sounds if the keypad remains connected and programming
is finished. Remove the keypad harness to disconnect the
keypad from the 734N-WIFI module and silence the alarm.
NO COMM WITH PNL
LAST
REMOVE KEYPAD