DMP Electronics 734N-WIFI, Installation And Programming Manual

Page: 30 / 44

26 734N-WIFI Installation and Programming Guide | Digital Monitoring Products, Inc.
In the keypad display, the letters aaa correspond to site
code one, letters bbb to site code two and so on to hhh
representing site code eight.
Press the first top row select key or area to display the
>
character next to the site code 1. Press the first select key
or area again to move to the bottom line. Press the second
select key or area to move between site codes two and six
and so on. When you have selected the site code you want
to change, press CMD.
ENTER SITE CODE
Press the first top row select key or area to enter a site
code number. Use the keypad digits to enter the three-digit
site code number. A card with a site code greater than
three digits cannot be used. Use only cards with three-digit
site codes.
Press the fourth top row select key or area to delete the
site code number displayed and return to the site code
display. Repeat these steps to change, delete, or add other
site codes.
NUMBER OF USER CODE DIGITS
The 734N-WIFI module recognizes user codes from four to
twelve digits long. Press any top row select key or area to
enter a user code digit length. This number must match the
user code number length being programmed in the panel.
Default is 5 .
ENTER SITE CODE
127 ___ ___ DEL
ENTER SITE CODE
127 ___ ___ DEL