DMP Electronics 734N-WIFI, Installation And Programming Manual

Page: 24 / 44

20 734N-WIFI Installation and Programming Guide | Digital Monitoring Products, Inc.
When the on-board Form C relay activates and the user
opens the door connected to zone 2, the zone is delayed
for the number of seconds programmed in ZONE 2 BYPASS
TIME allowing the user to enter/exit during an armed
period.
If zone 2 does not restore (door closed) within the
programmed time, the piezo sounds every other second
during the last ten seconds. If zone 2 restores prior to the
end of the programmed time, the piezo silences. If the
zone does not restore before the programmed time, the
734N-WIFI ends the bypass and indicates the open or short
zone condition to the panel.
ZONE 2 BYPASS TIME
Enter the number of seconds to elapse before the bypass
timer expires. The range is from 20 to 250 seconds. Press
any top row select key or area to enter the number of
seconds. The default is 40 seconds. Figure 11 shows how the
bypass option works.
ZONE 2 BYPASS
TIME:
40
5 Second
Strike
40-Second Zone 2 Bypass
entry/exit timer.
10 seconds before
the bypass time expires,
the device beeps if
the door is still open.
End of
timer.
40
Seconds
A zone open/short is
indicated if the door
remains open.
Figure 11: Zone 2 Bypass Timeline using default time