DMC Hi Cap 54, Owner'S Manual

Page: 25 / 61

Step 57. Position drum drive belts onto the drum drive ring and hook springs to front
support and on idler so drum belts are tight. See Photo 54.
Step 58. Using 7/16” diameter snap-over retaining pin, install auger support arm and
secure. See Photo 55.
Step 59. Using two 3/8” x 1” hex bolts, lock washers and hex nuts, install intake pan to
brackets welded onto front frame. See Photo 56.
Step 60. Using one 5/16” round nylon spacer and two #6 x 1-1/8” round head machine
screws and hex nuts, install operating angle level. Place round head
screws through holds provided in level, slide the nylon spacer on to one bolt,
install on cleaner frame, next to the decal, with nylon spacer closest to the
drum. See Photo 57.
Photo 56
Photo 57
Photo 55
Photo 54
16