DMC Hi Cap 54, Owner'S Manual

Page: 37 / 61

Step 23. To place 10” auger on Transport Model 54 Grain Cleaner, lift motor end of
auger up until auger pivot pin can be lowered into the hole provided in the
auger support arm. Secure with one 3/16” x 1-1/2” cotter pin. See Photo 97.
Step 24. Remove clevis pin from auger lift. Take cable in hand and tip auger lift
assembly outward. Continue to unwind cable until enough slack is attained to
take cable under 10” auger back up and over bottom pulley of lift assembly.
Reconnect cable to clevis pin. See Photo 98.
Photo 97
Photo 98
Step 25. After cable has been put into position, winch 10” auger up as shown in Photo 99, until
lift assembly pivots inward. This is the transport position. BE SURE CABLE IS TIGHT
AND WINCH IS IN LOCKED POSITION WHEN TRANSPORTING.
Photo 99
MOUNTING INSTRUCTION FOR 10” x 12’ AUGER
MODEL 54 GRAIN CLEANER
28