DMC Hi Cap 54, Owner'S Manual

Page: 12 / 61

Step 10. Bolt the jack assembly to the tongue assembly, using four 3/8” x 1” hex
bolts, lock washers and hex nuts. See Photo 10.
Next, bolt lower frame braces to axle assembly frame supports and front
tongue trash pan bottom, using six 3/8” x 1’ hex bolts, 3/8” SAE flat washers,
lock washers, and hex nuts. BE SURE side channels are even and square.
See Photo 11.
Step 9. Bolt front brace extensions to front frame assembly and to trash pan bottom,
using six 3/8” x 5” hex bolts, lock washers and nuts. See Photos 9 and 10.
SECURE ALL LOOSE BOLTS FROM STEPS 8 AND 9.
Photo 9
Photo 10
Photo 11
3