DJO Global 80.00.023, Operating Instructions Manual

Page: 65 / 276

61
Eng
lis
h
Patients with
a programmed chip card
• First complete the mechanical
adjustments.
• Then insert the chip card (the patient is
not yet positioned on the CPM device).
• Press the START key: the device will
move to the starting position as speci-
fied by the parameters stored on the
chip card and stops.
• Position the patient on the CPM device
and press the START key to initiate
therapy.
5.2 Programming
ARTROMOT®-S3 Standard
Different programming levels are provided
to program the ARTROMOT®-S3 Standard
models.
You change between levels by pressing the
MENU key repeatedly.
The display always indicates the currently
selected level.
The following
treatment values, settings
and information can be entered/viewed
on the programming unit (1):
LEVEL 1:
– Abduction
– Adduction
– Internal rotation
– External rotation
LEVEL 2:
– Pause
– Therapy timer
– Speed
– New patient
LEVEL 3:
– Reverse on load - motor A
– Reverse on load - motor B
– Motor A ON/OFF
– Motor B ON/OFF
LEVEL 4:
– Transport setting
– Synchronized/
non-synchronized mode
– Total therapy time
– Service menu
Note!
• While you adjust the values, the
carriage will move to the set range.
This allows you to easily and quickly
determine the ROM where the pa-
tient does not experience pain.
• Special functions can be pro-
grammed and retrieved with
ARTROMOT®-S3 Comfort devices
(see sections 5.4 and 5.5).
• The angle entered last for the respec -
tive direction of motion will be saved
in each case.
5.3 Treatment value details –
Standard models
• To access the programming level you
need, press the MENU key repeatedly.
• The treatment parameters are selected
with the different parameter keys .
• To change the treatment values, press
the + / – keys .
• To enable/disable a function, press the
respective parameter key again.
• To save the entered values, press the
STOP key .