66
5.4 Programming
ARTROMOT®-S3 Comfort
ARTROMOT®-S3 devices of the Comfort
series offer two more programming levels
for additional functions.
The programming levels are selected in the
same way as on Standard models.
Programming levels 1, 2, 3 and 6 are identi-
cal with programming levels 1 to 4 of the
Standard models.
All special functions are disabled in the
standard models.
The following treatment values, settings
and information can be entered/viewed on
the programming unit (1):
LEVEL 1:
– Abduction
– Adduction
– Internal rotation
– External rotation
LEVEL 2:
– Pause
– Therapy timer
– Speed
– New patient
LEVEL 3:
– Reverse on load - motor A
– Reverse on load - motor B
– Motor A ON/OFF
– Motor B ON/OFF
LEVEL 4:
– Warm-up protocol
– Isolation program
– Therapy documentation
Abduction/adduction
– Therapy documentation
Internal/external rotation
LEVEL 5:
– Oscillation
– Stretching in abduction
– Stretching in
internal rotation
– Stretching in
external rotation
LEVEL 6:
– Transport setting
– Synchronized/
non-synchronized mode
– Total therapy time
– Service menu
5.5 Protocol details –
Comfort model
• To access the programming level you
need, press the MENU key repeatedly.
• The treatment parameters are selected
with the different parameter keys.
• To change the treatment values, press
the + / – keys.
• To enable/disable a function, press the
respective parameter key again.
• To save the entered values, press the
STOP key.
All special functions are disabled in the
standard models.
Note!
LEVEL 1:
equivalent to level 1
of the Standard model (see: 5.3)
LEVEL 2:
equivalent to level 2
of the Standard model (see: 5.3)
LEVEL 3:
equivalent to level 3
of the Standard model (see: 5.3)
LEVEL 6:
equivalent to level 4
of the Standard model (see: 5.3)
Summary of Contents for 80.00.023
