DIY BBQ Angela 'L' Island, Instruction Manual

Page: 17 / 48

17
Slide-In & Drop Cutout (Grill)
Step
1
1
Clamp the Long Catch Track to the back Perimeter Wall of your module with Vice Clamps about where you would like
to place your appliance. (Make sure to leave enough room for the Side Burner cutout (page 29)). Make sure that the top
of the Long Catch Track is flush with the top of the Perimeter Track.
Note: If your Catch Tracks are too long for your specific module, please see page 47 for instructions on how to
properly cut your Catch Track(s) to fit your module.
Add the amount of screws that match the number of studs in the back Perimeter Wall of your module.
2
2
Step
Professional Tip -
Placement of Screws
To avoid drilling a screw into the screws already placed
in your Perimeter Wall, make sure to drill the screws next
to each stud instead of in the direct center of the stud.