DIY BBQ Angela 'L' Island, Instruction Manual

Page: 23 / 48

23
Use two of the Perimeter Wall Studs from your module kit and place them flush against the cuts that were made in
steps 13 and 14. Make sure that the smooth side of the studs face inward, toward the appliance.
Note: Before moving onto the next step, it is a good idea to make certain that the Perimeter Wall Studs are at a
ninety degree angle to the bottom Perimeter Wall Track. (See inset)
15
15
Step
Drill at least 6 screws into the front wall studs.
Note: If you would like to drill two screws into the upper back side of the studs, you will first need to remove the
screws from the Short Catch Tracks.
16
16
Step
Smooth side
toward the
appliance
Open side
away from
the appliance
90º
1
2
3
5
6
4