DIY BBQ Angela 'L' Island, Instruction Manual

Page: 19 / 48

19
Slide the open end of the L-Shaped Countertop Studs built in steps 3 through 6 into the Long Catch Track and
then clamp the Short Catch Tracks to the top track of the front Perimeter Wall of your module. Make sure the tops
of the Short Catch Tracks are flush with the top of the Perimeter Wall Track.
Note: Make sure the smooth sides of the Countertop Studs are facing the appliance.
7
7
Step
Smooth side
toward the
appliance
Open side
away from
the appliance
Place the first Appliance Track in-between the Countertop Studs near the back of the module. The Appliance
Track has been precut to fit the width of the appliance. To best position the appliance, place one side of the Appli-
ance Track flush against the first Countertop Stud, then readjust the second Countertop Stud to rest flush against
the other end of the Appliance Track.
8
8
Step
Make sure edges of the Appliance
Track are flush with the edges of
the Countertop Studs.