DIY BBQ Angela 'L' Island, Instruction Manual

Page: 35 / 48

35
Slide-In Only Cutout (Refrigerator)
Step
1
1
Use two of the Perimeter Wall Studs from your module kit and place them about where you would like the appli-
ance to sit. Make sure that the smooth side of the studs face inward, toward the appliance.
Note: Before moving onto the next step, it is a good idea to make certain that the Perimeter Wall Studs are at a
ninety degree angle to the of the Perimeter Wall Track. (See inset)
Smooth side
toward the
appliance
Open side away from the appliance
90º
Place the Appliance Track between the Perimeter Wall Studs by inserting it at an angle and then sliding it into posi-
tion. Make sure that the smooth side of the Appliance Track is facing down, toward the appliance.
Note: The Appliance Track has been precut to fit the width of the appliance. To best position the appliance, place
one side of the Appliance Track flush against the first Front wall stud Stud, then readjust the second Front wall stud
to rest flush against the other end of the Appliance Track.
2
2
Step
Smooth
side toward
the appli-
ance
Slide
Up
Open side
away from
the appliance