KR 805
Maintenance
11.12.08
9-5
9.2
Replacing components
9.2.1
Replacing the grinding discs
When the grinding quality is no longer as desired, this means that the grinding discs need to be re-
placed.
CAUTION
The grinding discs must not be removed until the machine is completely at rest!
Before beginning this task, switch off the machine and pull out the mains plug from
the mains socket.
Procedure:
1.
Remove the stationary disc flange (1) according to
the description in the section 9.1.2 "Cleaning the
grinding mechanism" (steps 1-5).
2.
Remove the grinding disc (2) from the stationary
disc flange (1), and the grinding disc (3) from the ro-
tating disc flange (4). The respective procedure is
described in the next two sections.
3.
Insert the new grinding discs.
HINT
Ensure that the mating surfaces are absolutely
clean before reassembly! Failure to do so will
result in inconsistent grinds.
Fig. 9/5
