KR 805
Packaging and transport
11.12.08
4-1
4
Packaging and transport
4.1
Packing the machine
The machine must be packed appropriately to keep it safe during transport. The machine manufacturer
recommends the type of packaging material used for dispatch from the factory.
4.2
Unpacking the machine
Procedure:
1.
Bring the machine while still packed as close as possible to the installation site. Read the chapter
5.1 entitled “Installation site requirements”.
2.
Remove the packaging and check the whole shipment for completeness as detailed on the delivery
note and for any damage caused during transport.
3.
If you discover transport damage, notify both the transport and dispatching companies immediately.
Please refer to the chapter 13 entitled “Contact addresses” for the address and contact numbers of
the machine manufacturer.
Make a photographic record of the damage. In addition, retain all the packaging material to
assist any further clarifications!
4.
Place the machine in its final position.
The dimensions of the packaging material match those of the machine. We recommend that you store
this material in a dry place for any future transport.
