KR 805
Maintenance
11.12.08
9-2
HINT
Do not use any alkaline cleaning agents. Alkaline cleaning agents can impair the flavour of the
coffee.
NOTICE
Do not use compressed air to blow off material from the machine and do not spray with steam
or water! This could short-circuit and thus damage the machine.
9.1.1
Removing / Replacing the hopper
The bean hopper has to be removed to clean the grinding mechanism, grinding discs and delivery tube.
HINT
If there are still coffee beans inside the bean hopper, rotate the slide gate (1) in the direction of
the arrow. This prevents the coffee beans falling out when you remove the hopper.
If you are using a bean hopper without a slide gate, it is recommended to empty the hopper
before removing it.
Procedure:
1.
Disconnect the mains plug from the power
outlet.
2.
Use a (size 0) screwdriver to push the pin (2)
downwards and simultaneously rotate the
bean hopper counter-clockwise.
3.
Once the bayonet coupling has been re-
leased it is possible lift up and remove the
bean hopper.
4.
Replacing the bean hopper is carried out in
reverse order, but without pushing down the
pin (2).
NOTICE
Use a vacuum cleaner to remove any
coffee beans from the grinding chamber
(4) before replacing the bean hopper. The
bayonet coupling has to be clean and free
from foreign matter in order for it to close
correctly.
Fig. 9/1
