KR 805
Maintenance
11.12.08
9-4
9.1.3
Cleaning the delivery tube
Procedure:
1.
Disconnect the mains plug from the power out-
let.
2.
Remove the bean hopper as described in sec-
tion 9.1.1 “Removing / Replacing the hopper.
3.
Lift and remove the cover plate (1) from the
machine.
4.
Use a (size 3) screwdriver to unscrew the 3
screw (2).
5.
Lift up the delivery tube (3) until both screw
heads (4) fit through the opening. Subse-
quently remove the delivery tube (3) towards
the front.
6.
Clean the delivery tube and remove any for-
eign matter. Please read section 9.1 "Clean-
ing".
7.
Reassemble all the parts in reverse order.
Fig. 9/3
8.
Replace the bean hopper as described in section 9.1.1 “Removing / Replacing the hopper”.
HINT
Ensure that the mating surfaces are absolutely clean before reassembly!
9.
Reconnect the grinder to the power supply.
9.1.4
Cleaning the collecting tray
Clean the collecting tray daily if soiled. Please
read section 9.1 "Cleaning".
The collecting tray can be removed and re-
placed without tools.
Fig. 9/4
