Controls - 60
JT100/JT100 All Terrain Operator’s Manual
Right Control Console
5.
Shutdown override
switch
To temporarily override
engine shutdown, press
and hold.
NOTICE:
After 30 seconds, engine
will again shut down unless fault
condition has been cleared on
diagnostic gauge.
6.
Ignition switch
To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
IMPORTANT:
Restart engine with
ignition switch after it has been turned
off with remote engine stop switch.
7.
Remote engine stop
switch
To stop engine, press.
To restart engine, turn ignition
off and then back to start.
IMPORTANT:
If this switch is used to
stop drilling unit, be sure to turn
ignition switch off if machine will be
left unattended for long periods of
time. Battery discharge can occur.
Item
Description
Notes
c00ic056t.eps
Summary of Contents for JT100
