Ditch Witch JT100, Operator'S Manual

Page: 230 / 268

JT100/JT100 All Terrain Operator’s Manual
Service - 229
2000 Hour
Change Engine Coolant
Drain cooling system at drain (3) every two years
or 2000 hours. Add DEAC at fill (1) according to
instructions below until fluid level is to the halfway
point on the sight glass (2).
Contents under pressure. Relieve pressure before
opening. Death or injury could occur.
To help avoid injury:
• Do not remove the pressure cap from a hot engine.
• Wait until the coolant temperature is below 122°F (50°C) before removing pressure cap.
• Do not stand near or over the expansion tank while operating the engine with the pressure cap off.
Improper handling or use of chemicals may result in
illness, injury, or equipment damage. Follow instructions on labels and in
material safety data sheets (MSDS).
To help avoid injury:
• Keep coolant away from children and pets.
• Dispose of coolant in accordance with local environmental regulations.