Dish Network DP512, User Manual

Page: 67 / 136

Chapter 3
Page 62
Using the System
•
For All Blacked-Out Programs
- If you set a timer for a program or event
that is blacked out in your area, when this timer operates the receiver may
display only an error or password-entry screen. If you have set an
Ext Event
Timer
, the device will record this screen and not the blacked-out event.
Event Timer Performance when the Receiver is Off
If the receiver is OFF (in standby mode) at the time an Auto-Tune or DVR
Event Timer is scheduled to operate, then the receiver will turn itself ON.
Watching One Program While Recording Another
Using Two Tuners to Record
You can set up your dual-tuner satellite receiver to record one or even two
programs while you’re also watching one that you’ve previously recorded.
1. Press GUIDE to open the
Program Guide
. Find a channel with
a program or event that you want to watch now.
2. Press SELECT to tune to that channel and watch the program.
3. Press the
RECORD
button. A message will be displayed asking
whether you want to record the remainder of the program. Select
OK
to begin recording it now.
4. Press GUIDE on the remote. Use the
Program Guide
to find another
program or event that you want to watch now. Select that program. You are
now watching one program while recording another one at the same time.
5. Press RECORD and select
OK
when the popup screen displays. You are
now recording two programs or events at the same time.
6. Press the DVR button on your remote control. The
DVR Event
screen will
open. You should see the two programs that are recording, indicated by the
red dot next to the listings in the
Program Guide
.