Dish Network DP512, User Manual

Page: 40 / 136

Page 35
Setting Up TV1 to Operate in IR (default)
Setting Up TV1 to Operate in IR (default)
The following instructions describe how to set up TV1 to operate in IR only,
which is the default.
1. Perform the following with an existing linked remote control:
a. Open the
TV1 UHF Pro Setup
screen by pressing MENU-6-1-6 on the
remote control.
b. Select
Disable
from the
TV1 UHF Pro Setup
screen.
c. Select
System Info
to open the
System Information
screen.
2. Perform the following with an IR remote control, such as a Remote Control
5.4 (as shown in the writing on the back of the remote), that you intend to
use to control TV1:
a. Press the RECORD button. The
Done
button should be highlighted.
b. Make sure the
System Information
screen shows that the
Primary
Remote Address
indicates
IR
.