Danish Interpretation Systems
User Manual
User Manual DDS 5900
54
<
volume
> The volume of the loudspeakers ranging from ‐41 to 0. The value ‐41 indicates Off, whereas values from ‐
0 to 0 indicates attenuation in dB.
4
10.3.2.2
10.3.2.3
10.3.2.4
10.3.2.5
Line input 1 level
line_input_level_1
<le
vel o
vel><CR>
Le
f line input 1 signal.
<
level
> The level of line input 1 ranges from ‐41 to 0. The value ‐41 indicates Off, whereas values from ‐40 to 0
ndicates attenuation in dB.
i
Line output level (A-D)
line_output_level
<output>
<level><CR>
Adjust the level of line output signal.
outp
<
ut
> Indicates which output is being controlled. Possible values: ‘A’, ‘B’, ‘C’, ‘D’.
<
level
> The level of line output ranges from ‐41 to 0. The value ‐41 indicates Off, whereas values from ‐40 to 0
ndicates attenuation in dB.
i
Define audio path
audio_path
<path>
<on/off><CR>
his comm
o
s t
t
T
and defines audi connection in he sys em.
<
path
> Indicates which connection is being controlled. Possible values: 'mic_to_speaker', 'mic_to_floor',
nein_1
'li
_to_speaker', 'linein_1_to_lineout_A', ‘linein_1_to_floor’.
<
on/off
>
Indicates,
whether
the
audio
is
being
routed
from
microphones/lineinput_1
to
peakers/lineoutput_A/floor.
s
Audio status complete
audio_status_done<CR>
his command terminates audio status streaming.
T
