Danish Interpretation Systems
User Manual
Figure 5.4-D
Connecting the DDS 5900 Digital Discussion System to an audio recorder.
5.4.5
Connec ing an a di m xer
t
u o
i
The CU 5905 is connected to the DC 5980P
Conference Units using EC 6001‐xx Cat5e cables.
This configuration is used when the volume from one
or more microphones is required to be controlled
separately or equalisation is needed. One or more
Outputs are connected to the external mixer, where
the control or equalisation is done.
The sound from the audio mixer is then send back to
he CU using the ‘Audio In 1’ input.
t
Use the ‘Group’ selection for the four outputs and
make seat selection for each group. Refer to section
‘5.6 Web Browser’ item #8.
Important:
If ‘Out A’ is send to the mixer the
following settings must to be done:
‘CU 5905 Setup * Audio * Loudspeaker Control * Microphone ‐>
Loudspeaker’ shall be set to ‘Off’.
‘Out.A’ shall be un‐selected in the selection ‘CU 5905 Setup * Audio
* Input/Output Control * Audio In 1’.
Figure 5.4-E
Connecting the DDS 5900 Digital Discussion System to an audio mixer.
User Manual DDS 5900
20
