DIS DDS 5900 User Manual Download Page 10

Page: 10 / 54

3.2.1

Sound transmission

The DDS 5900 Digital Discussion System is based on a

digital transmission of sound from the conference
unit to the central unit and back again to the built in

rs in t

loudspeake

he units.

The sound transmission is fully encrypted to avoid
eavesdropping.

3.2.2

Features

The DDS 5900 Digital Discussion System has the
follo

atures:

wing main fe

•

Fully digital

•

Excellent sound quality

•

“State of the Art” fully digital integrated
discussion system offering interpretation and

language distribution.

•

Unique digital DATA and AUDIO bus named DCS‐

LAN.

•

10 incoming channels (8 floor channels + 2

annels)

interpreter ch

and one Audio input.

•

3 distributed channels (1 floor + 2 interpreted

channels)

•

The conference units are powered and controlled

by the CU 5905 Central Unit, which drives up to

60 units on 2 chains.

•

If more units are required the EX 6010 Extension

Unit or PS 6000 Power Supply is available

•

A total of 250 conference units can be connected

to the system.

•

TCP/IP connection on CU 5905 for external

operation of the system using a PC or a control
system such as AMX ® or Crestron ®.

3.2.3

abli g

The DDS 5900 system is using screened CAT5e

cabling (F/UTP or U/FTP) ensuring a very cost

effective installation and easy set‐up of portable
systems

The conference units are daisy chain connected to the
central unit.

The number of units, which can be connected to a

central unit, depends on length of the feeding cable

nd the length of the cable between each unit.

3.3

System components

3.3.1

DDS 5900 Conference System

The DDS

em consi

5900 syst

st of the following units:

CU 5905

Central Unit

DC 5980P

Portable Conference Unit

GM 5923

Gooseneck Microphone, 40 cm

GM 5924

Gooseneck Microphone, 50 cm

SB 5980

Storage Box 10 DC 5980P and GM 59xx

3.3.2

Supported units, DCS 6000
System

The following units from the DCS 6000 Digital

Conference System can be used in the DDS 5900
system:

EX 6010

Extension Unit

ains

PS 6000

Power Supply

four ch

RP 6004

Repeater/Splitter for

JB 6104

Junction Box with 4 outputs

DH 6021

Delegate Headphone

e, 40 cm
e, 50 cm

GM 6523

Gooseneck Microphon

M 6524

Gooseneck Microphon

G
GM 6622

Shotgun Microphone

For detailed instruction in how to use the above units,

please refer to the User Manuals for the relevant
products.

User Manual DDS 5900

Summary of Contents for DDS 5900























































Search results

Summary of Contents for DDS 5900

Reviews:

Related manuals for DDS 5900

Brands by name

Popular brands

DIS DDS 5900, User Manual

Search results

Summary of Contents for DDS 5900

Reviews:

Related manuals for DDS 5900

Brands by name

Popular brands