Danish Interpretation Systems
User Manual
<
level
> The level of line input 1 ranges from ‐41 to 0. The value ‐41 indicates Off, whereas values from ‐40 to 0
indicates attenuation in dB.
he CU responds to this command by returning a ‘
line_input_level_1’
command.
T
10.3.1.3
10.3.1.4
10.3.1.5
Set line output volume (A-D)
line_output_volume
<output>
<
Adjust the level of line output signal.
output
>
volume><CR>
<
Indicates which output is being controlled. Possible values: ‘A’, ‘B’, ‘C’, ‘D’.
<
volume
> The volume of line output ranges from ‐41 to 0. The value ‐41 indicates Off, whereas values from ‐40 to 0
indicates attenuation in dB.
he CU responds to this command by returning a
'line_output_volume'
command.
T
Define audio path
audio_path
<path>
<on/off><CR>
his comm
io
s
t
T
and defines aud connection in the sys em.
<
path
> Indicates which connection is being controlled. Possible values: 'mic_to_speaker', 'mic_to_floor',
nein_1
'li
_to_speaker', 'linein_1_to_lineout_A', ‘linein_1_to_floor’.
ed from mic
neinput_1 to speakers/lineoutput/floor.
<
on/off
> Indicates, whether the audio is being rout
rophones/li
he CU responds to this command by returning an ‘
audio_path
’ command.
T
Request audio status
audio_status<CR>
System audio status.
he CU responds to this command by returning a list of commands for the Audio settings:
T
loudspeaker_volume
line_output
ll outputs A‐D)
_volume
(for a
audio_path
(for all paths)
audio_status_done
line_input_level
10.3.2 Commands from CU 5905 to External Control
10.3.2.1 Loudspeaker volume
loudspeaker_volume
<volume><CR>
Volume of loudspeakers for all conference units.
User Manual DDS 5900
53
