Danish Interpretation Systems
User Manual
6
DC 5980P Conference Unit
6.1
Overview
The Con
res:
ference Unit offers the following featu
•
Conference unit can be configured as
erpretation Unit
Delegate, Chairman or Int
•
Touch button technology
•
cket
Lockable XLR microphone so
•
Two channel interpretation
•
ain connection of units
Cat5e daisy ch
•
Loudspeaker
•
ns
Mute/All Del Off and Speak/Request butto
•
el indication
Channel selector with chann
•
trol
Headphone volume con
•
Headphone connector
1.
Button
panel
–
The button panel contains the
controls available on the unit.
2.
Headphone
socket
–
Connection of headphone
DH 6021 or similar.
3.
XLR
socket
for
microphone
–
Used to connect a
DIS gooseneck microphone to the unit.
The GM
59xx gooseneck microphone can be locked to the
unit with a 1.5 mm hex/allen key. The lock is
accessible from the small hole next to the XLR
socket. Turn the hex key counter clockwise to
lock the gooseneck microphone to the unit and
turn the hex key clockwise to unlock the
gooseneck microphone o
fr m the unit.
4.
Loudspeaker
–
B
uilt in loudspeaker. The
loudspeaker is turned ‘Off’, when the microphone
in the unit is active.
The built in loudspeaker is always ‘Off’ when the
unit is configured as Inte
rpreter Unit.
5.
DCS
LAN
connection
–
Two RJ45 sockets are
located at the bottom of the unit for connecting to
the previous unit or to the CU 5905 Central Unit
and to the next unit. A plastic cable clamp can be
ordered separate and can be used to fix the
cables if desired.
Figure 6.1-A
DC 5980P Conference Unit
6.2
Preparing the conference unit
The units must be prepared before use. The following
preparations have to be done:
•
tt
Attaching bu ons overlay
•
Configuring the unit to the required unit
type.
6.2.1
Conference Unit Overlays
The following overlays are available as standard:
6.2.1.1
Delegate, ‘Speak’ & ‘Mute’ button
This overlay is delivered together with the conference
User Manual DDS 5900
35
