Danish Interpretation Systems
User Manual
#
Menu
Settings
Description
8.
Uni
to
Seat
Relation
–
t
All units connected are shown in
this list with ‘Serial Number’ and
‘Seat Number’.
When a unit is connected for the
first time, it will be assigned the
next ‘Seat Number’ and assigned a
‘Delegate Name’ in the format ‘Seat
x’, where ‘x’ is the assigned seat
number. The assigned ‘Delegate
Name’ can be changed to show the
actual name of the delegate placed
in the seat.
After assigning names, the ‘Submit
Changes’ has to be activated.
The ‘Seat Number’ can be changed
as well. If the same number is typed
into two seats, it is marked with a
red frame and the ‘Submit Changes’
button is disabled. The ‘Seat
Number’ is a numerical in the range
1 to
65535
.
When the mouse curser is moved to
a seat number field, the red light
ring in the microphone in the
corresponding conference unit is
flashing until the curser is moved to
another field or ‘Submit Changes’
has been activated. This feature
makes it easy to re‐number the
units.
If units are disconnected they are
marked with a yellow indication in
the list. The units can be removed
from the list either individually or
all by clicking the yellow button.
The ‘Reset Names’ button delete all
assigned delegate names.
9.
Unit
Type
Change
–
When set to ‘On’, it is possible to
change the unit type of the
connected conference units as
specified
in
section
‘6.2.4
Configuration of the unit’.
When set to ‘Off’ the unit type is
locked and cannot be changed on
the unit.
User Manual DDS 5900
28
