76
DIRECTV
®
NON-DVR
USER GUIDE
Possible Causes:
DIRECTV
®
Receiver will not turn on
Your receiver won’t turn on with either the remote or from the front panel.
-
Remote batteries are dead.
-
Receiver or power strip is not plugged in to a power source, or power cord is not plugged in to receiver.
-
Wall outlet is dead.
Solution:
-
If remote is not turning on the receiver:
•
Make sure mode switch is all the way to left, then press PWR button on remote.
•
If still not responding, check batteries – green light should blink when any key is pressed.
•
If steady blinking, replace batteries.
•
If solid green light, make sure nothing is blocking the IR sensor.
-
If receiver does not respond to pressing the buttons on the front panel of the receiver:
•
Verify power cord is plugged in at both the wall outlet and rear panel of the receiver.
•
If receiver is plugged into a wall outlet, make sure it is not controlled by a wall switch.
•
If receiver is plugged into a power strip, make sure power strip is working.
•
If the power strip is not working, press the reset button on the power strip OR unplug and plug back in (not all power
strips have a reset button).
Frequently Asked Questions
Summary of Contents for D10
Page 3: ...3 ...
Page 4: ...4 DIRECTV NON DVR USER GUIDE ...
Page 12: ...12 DIRECTV NON DVR USER GUIDE ...
Page 16: ...16 DIRECTV NON DVR USER GUIDE ...
