52
DIRECTV
®
NON-DVR
USER GUIDE
Guided Setup
Activate Your DIRECTV
®
Service
If your receiver was not professionally installed, or you have had to reset your receiver for any reason, you will need to follow the guided
setup screens before starting DIRECTV service.
1.
Have on hand your service address, social security number and a valid major credit card.
2.
Note your receiver ID and access card numbers. The receiver ID is on a sticker behind the access card door on the front of the
receiver, while the card number is on the access card itself. Use the Product Information page to note this information.
3.
When you’re ready, just call
1-800-531-5000
to pick the programming package that’s right for you and subscribe to DIRECTV
service.
After these setup procedures are complete, you’ll see a message onscreen that says, “Acquiring Satellite Info”. Your receiver is
gathering information from the satellite for the onscreen program guide. Next you’ll be asked in you want to program your remote to
control other equipment such as your TV and/or DVR player.
1.
Make sure the MODE switch at the top of the remote control is set to DIRECTV, which is the far-left position.
2.
Press PWR. The DIRECTV
®
Receiver will turn on. (Make sure your TV is also turned on!)
3.
The first screen will allow you to select a language. Using the arrow keys on the remote control, move to the language you prefer
and press SELECT.
4.
Follow the onscreen instructions.
Once all the setup processes are complete, all that’s left to do is activate your DIRECTV
®
service. Be sure to:
Setup and Activation
Summary of Contents for D10
Page 3: ...3 ...
Page 4: ...4 DIRECTV NON DVR USER GUIDE ...
Page 12: ...12 DIRECTV NON DVR USER GUIDE ...
Page 16: ...16 DIRECTV NON DVR USER GUIDE ...
