1 Getting Started
AIM User’s Manual
14
Battery Replacement
If necessary, you can replace the AIM’s battery. To obtain a new battery, contact
Trilithic. See “Spare Parts List” on
page
20
.
You also can return your AIM to Trilithic Customer Service and request that the
battery be replaced. See “Return Policy” on
page
v
.
Caution:
ESD (electro-static discharge) can damage the meter. When removing and
replacing the battery, observe proper ESD precautions to avoid static discharge. We
recommend performing this procedure at a functional ESD workstation. Avoid
touching the meter’s circuit board during the procedure.
Important:
Make sure the AIM is turned off and is not connected to a power source
before you remove and replace the battery.
To remove the battery:
1
Using a Phillips-head screwdriver, remove the 6 screws from the back housing of
the AIM. See Figure 5.
Figure 5 Removing the Back Housing Screws
Screws
Screws
Tip:
We recommend using a power Phillips
screwdriver that can provide 6 to 9 in-lbs of
torque.
