Direct Supply Attendant SOLO-DS, Owner'S Manual

Page: 16 / 33

16
Operation
ON/OFF
With the scale off, pressing this key will apply power
to the scale and turn on the display. If the scale is on,
pressing this key will turn the scale off.
PRINT
This key is used to send the weight and associated
data to the serial port.
ENTER
This key serves two purposes. First, when reviewing
setup parameters, pressing the “ ” key will accept
the current displayed setting of the parameter.
Second, the “ ” key is used to signal completion
of the entry of data (in both setup and operation) and
causes the scale to process the data entered.
ZERO
This key is used to reset the display to zero. Note that
if the “zero” key is pressed with weight on the scale
platform, the display will tare the weight and change
to 0.0 . When the weight is removed, the display will
show a negative weight value and then change to
0.0
.
LOCK/RELEASE
This key is used to lock and unlock the display.
Pressing this key will cause the display to lock onto
the weight and remain displayed after the user steps
off the scale. Pressing the key again will unlock the
display and return it to zero.
NOTE: The scale will not respond to pressing the
“ ” key unless the weight is stable and the STA
annunciator is turned on.
Keypad Functions
•
WARNING:
DO NOT operate the keypad with pointed objects (pencils, pens, etc.). Damage to
keypad resulting from this practice is NOT covered under warranty.
BMI
The BMI key is used to input the user’s height
and then to perform the Body Mass Index (BMI)
calculation. Note that the scale will not respond to
pressing the key unless the weight is stable. When
using the height rod (or no height rod), pressing the
key once allows the operator to enter the height
of the user using the or keys to increment or
decrement to the correct height. After entering the
user’s height, pressing it again will display the Body
Mass Index (BMI) calculation. Pressing it a third time,
will return the display to the user’s weight.
NOTE: While the user is still standing on the scale,
pressing the “ ” key will toggle between BMI and
weight display. Also, note that once the user steps
off the scale, the display automatically returns to the
weight only mode.
UP ARROW
This key is used when performing the Body Mass
Index (BMI) calculation to increase the height value
When using the Mother/Baby Weighing feature, this
key is used to determine the weight of infants and
toddlers held by an adult. This feature allows the adult
to be weighed first, and then the adult and infant/
child weighed with only the weight of the infant/child
displayed..
DOWN ARROW
This key is used when performing the Body Mass
Index (BMI) calculation to decrease the height value.
NOTE: During setup and calibration, the arrow keys
are used to select setup and calibration values.