22
hh: (Hours)
The display will show
hh:00
, the current Hours setting. If value displayed is acceptable, press the
“ ” key to save it and proceed to the next prompt. Otherwise, press the or keys to select a
new value from 00 to 23 and then press the “ ” key to save it and proceed to the next prompt.
•
IMPORTANT!
Time is entered in a 24-hour format. When entering times after noon (12:00 PM),
you must add 12 to time. For example, 3:00 PM would be entered as 15:00.
NOTE:
The default hour setting is 00 (mid-night).
yy: (Years)
The display will show
YY:00
, the current Years setting. If value displayed is acceptable, press the
“ ” key to save it and proceed to the next prompt. Otherwise, press the or keys to select a
new value from 00 to 99 and then press the “ ” key to save it and proceed to the next prompt.
Note that 00 represents year 2000, 01 represents 2001 and so on.
NOTE:
The default year setting is 00 (2000).
nn: (Months)
The display will show nn:01, the current Months setting. If value displayed is acceptable, press the
“ ” key to save it and proceed to the next prompt. Otherwise, press the or keys to select a
new value from 01 to 12 and then press the “ ” key to save it and proceed to the next prompt. Note
that 01 represents January, 02 represents February so on.
NOTE:
The default month setting is 01 (January).
dd: (Day)
The display will show
dd:01
, the current Day setting. If value displayed is acceptable, press the
“ ” key to save it and proceed to the next prompt. Otherwise, press the or keys to select a
new value from 01 to 31 and then press the “ ” key to save it and proceed to the next prompt.
NOTE:
The default day setting is 01 (first day of month).
ASH (Automatic Shutoff)
The display will show
ash__
, the current Automatic Shutoff setting. If value displayed is acceptable,
press the “ ” key to save it and proceed to the next prompt. Otherwise, press the or keys to
select a new value and then press the “ ” key to save it and proceed to the next prompt. Allowable
values are 00 to 09 minutes in 1 minute increments. Note that selecting 00 disables the automatic
shutoff feature.
NOTE:
The default Automatic Shutoff setting is ASH03 (3 minutes).
bu;; (Buzzer Setting)
In operation mode, if an incorrect key is pressed, the scale will sound two beeps as a warning and
the operation will not be processed. The display will show
bu;;
, the current Buzzer setting. If value
displayed is acceptable, press the “ ” key to save it and proceed to the next prompt. Otherwise,
press the or keys to select enable or disable the Buzzer and then press the “ ” key to save it
and proceed to the next prompt. Allowable values are 0 (disable) or 1 (enable).
NOTE:
The default Buzzer setting is 1 (enable).
Setup Complete
Once the “ ” key has been pressed at the
bu;;
prompt, all Setup settings (current or new values)
will be saved and the scale will turn off.
Setup
(cont.)
Summary of Contents for Attendant SOLO-DS
Page 13: ......
