18
Operation
(cont.)
•
WARNING:
ALWAYS assist the user when stepping on and off the scale platform to ensure they
do not fall. NEVER leave a user unattended while they are on the scale platform. Failure to maintain
control of the user at all times can result in serious injury to you and/or the user.
Weighing Mode
1. Press the “ ” key. The scale will turn on and then display the software version for a few seconds.
2. Next, a small
o
is shown and moves across the display until a stable zero is established.
3. After establishing zero, the scale will show
0.0
on display. Note that if the scale cannot establish
zero, the display will show
Err0
for a few seconds and turn the scale off.
4. Assist user onto scale.
5. When the weight is stable, the weight reading will flash one time, a long beep will sound, the
reading will automatically lock and the LOCK annunciator will turn on. Note that the lock will be
released once the user steps off the scale.
NOTE:
If the weight increases or decreases more than 2 kg while the weight reading is locked,
the locked weight will automatically be released, and the new weight will be locked when it’s
stable.
6. Press the “
” key to hold the current weight reading. It will remain on the display after the user
steps off the scale. Press the “
” key again to release the current weight reading.
(Released)
(Hold)
7. Assist user off scale.
8. To turn scale off, press the “ ” key.
If the Automatic Shutdown feature has been enabled, the scale will turn off after a predefined
time of inactivity (no motion or weight on scale).
Summary of Contents for Attendant SOLO-DS
Page 13: ......
