9
1-800-245-9917
Step 3
1. Plug the cable connector into the RJ jack located on the Part 4 (scale platform).
2. Align the display and assembled column with Part 4 (scale platform) and insert the column into
opening of the scale platform.
•
CAUTION!
To avoid pinching or cutting the cable, make sure the cable is not between the base
and column when inserting the column into the base.
3. While holding the column in place, carefully lay the scale down with the column horizontal to floor.
4. Attach the column to the scale platform by inserting the (4) M5 x 15 machine screws and lock
washers through the holes in the scale platform into the threaded holes of the column. Tighten
the screws to secure the column to the scale platform.
The scale should be placed on a flat, level hard-surfaced floor or low-cut, unpadded carpet, away from
any rapidly moving air source (heating and cooling vents).
2
3
4
1
•
CAUTION!
Make sure
cable is not between base
and column.
Scale Assembly, Step 3
Summary of Contents for Attendant SOLO-DS
Page 13: ......
