8
Installation
(cont.)
Step 2
1. Align Part 3 (lower outside column) with assembled Part 1 and 2 (display upper outside and inside
column, and lower inside column).
2. Press the locking tab (on Part 2, lower inside column) inward and then insert into Part 3 (lower
outside column).
3. Slide the cable connector through Part 3 (lower outside column).
4. Press Part 3 and Part (1 and 2) together until the locking tab snaps in place.
5. Ensure that the locking tab is locked securely.
6. Install (2) M3 x 12 machine screws (one in each side of Part 3) to secure Part 1 and 2 together
with Part 3.
1
2
3
5
6
4
Press locking tab inward to
insert Part 2 into Part 3.
Slide the cable connector
through Part 3.
Ensure locking tab is
securely locked.
Install (1) M3 x 12 screw on
each side of Part 3.
Summary of Contents for Attendant SOLO-DS
Page 13: ......
