MTG1000B Trunk Gateway User Manual
MTG1000B Trunk Gateway User Manual
89
Copyright @ 2011-2015 Dinstar
6
Commands
6.1
Troubleshooting and Command Lines
This is a section for some customers who need more details of E1/T1 gateway with command lines. To make sure
the system runs successfully, we advise customers to set E1/T1 gateway by GUI. In this manual, some topics such
as how to check the IP, signaling and call conversation are covered.
6.1.1
Basic Command
Run system tool --- Telnet to log into the gateway. After entering
username
and
password
, run command
en
to
activate the privileged commands.
6.1.2
Show IP address
Run the command
show int
, the output shows the port names of FE0 and FE1, as well as IP address and MAC
address.
