MTG1000B Trunk Gateway User Manual
MTG1000B Trunk Gateway User Manual
32
Copyright @ 2011-2015 Dinstar
4.7.5
SS7 CIC Maintain
There are two objects to be maintained for SS7 CIC, namely E1/T1 ports and channels. Select
E1/T1
on the right
of
Operation Mode
, and the following interface will be displayed.
Parameters
Explanation
Operation Mode
E1/T1
Port
The No. of E1/T1 port
Protocol Type
ISUP or TUP
DTU
The No. of DTU which the E1/T1 ports belong to
Status
The E1/T1 ports have 16 statuses, including Activated, Disabled, Fault, RAI Alarm,
AIS Alarm, ISDN/SS7 Signal Alarm, Frame-Sync, Idle, Signal, Busy, L-block, R-
blocked, B-blocked, Blocking, Unblocking and Resetting.
The meaning of each status, please make reference to 4.4.2.
Meanwhile, you can carry out maintenance on the E1/T1 ports through the following buttons:
Select All
,
Invert
,
Clear
,
Block
,
Unblock
,
Reset
and
Cancel
.
Select
Channel
on the right of
Operation Mode
, and then select an E1/T1 port, the channels of the E1/T1 port and
their statuses are displayed.
