MTG1000B Trunk Gateway User Manual
MTG1000B Trunk Gateway User Manual
10
Copyright @ 2011-2015 Dinstar
3
Basic Operation
3.1
Configuration of IP Address
The default IP address of FE1 (network port for services) is 192.168.11.1, while that of FE0 (network port for
management) is 192.168.1.111.When FE0 is in use, it’s required that the IP address of FE0 and the IP address of PC
are at the same network segment.
1.
Connect the FE0 port of MTG1000B to a PC by using a network cable.
2.
Open the
TCP/IPv4 Settings
interface on the PC, and then click
Add
to add an IP whose format is
192.168.1.XXX. Or you can open the Internet Protocol (TCP/IP) interface to modify an existing IP into
192.168.1.XXX.
