MTG1000B Trunk Gateway User Manual
MTG1000B Trunk Gateway User Manual
46
Copyright @ 2011-2015 Dinstar
Remote Address
The IP address of the peer device interfacing with the MTG1000B
Protocol Type
Options include UDP, TCP and Auto
If Auto is selected, the protocol type is determined by the peer device.
Remote Port (UDP)
The SIP port of the peer device interfacing with the MTG1000B;
The default remote port is 5060.
Outbound Proxy IP address
SIP proxy IP address
If outbound proxy is used, enter the IP address or domain name of the
proxy server
Outbound Proxy Protocol Type
Options include UDP, TCP and Auto
If Auto is selected, the protocol type is determined by the peer device.
Outbound Proxy Port (UDP)
The default outbound proxy port is 5060.
Local Domain
The local domain set in the
SIP Parameter
interface
Support SIP-T
This parameter is for SS7. Its default value is ‘Disable’.
Get Callee from
Get the called number from ‘Request-line’ or ‘To Header Field’
Get Caller from
Get the caller number from ‘User Name’ or ‘Display Name’
Register to Remote
It is defined by IETF RFC3372, which is a standard used to establish
remote communication between SIP and ISUP;
The default value is ‘Yes’.
If ‘Yes’ is selected, MTG1000B will be registered to the peer device
whose IP address is filled in ‘Remote Address’.
Incoming SIP Authentication Type
Incoming calls from IP network can be authenticated by IP address or
password. If password is selected, you need fill in password. If IP
address is selected, incoming calls will be rejected when their IP address
are different from the remote address filled in.
Rport
Whether to enable the Rport of the SIP trunk
Dynamic Nat
Enable or Disable
If it is enabled, a private IP address can be mapped to a public address
from a pool of public IP addresses.
