Dinstar MTG1000B Series User Manual Download

Page: 61 / 123

MTG1000B Trunk Gateway User Manual

Max Out

Maximum number of callout concurrencies

Max In

Maximum number of callin concurrencies

4.11.3

IP Group Management

On the

IP Group Management

interface, you can add IP trunks to the IP group which have been established on

Group

interface.

Click

Add

, and you can see the following interface.

Parameter

Explanation

IP Group ID

The ID of the IP group

If you want to add more IP trunks to the IP group, do not change the IP group ID.

Index

The index of the IP trunk added to the IP group

Trunk Type

SIP

Trunk No.

Select an IP trunk that has been established on

SIP Config



SIP Trunk

interface.

IP Profile ID

The ID of the IP profile that will be used by the IP trunk.

Summary of Contents for MTG1000B Series



























































































































Search results

Summary of Contents for MTG1000B Series

Reviews:

Related manuals for MTG1000B Series

Brands by name

Popular brands

Dinstar MTG1000B Series, User Manual

Search results

Summary of Contents for MTG1000B Series

Reviews:

Related manuals for MTG1000B Series

Brands by name

Popular brands