Dinstar MTG1000B Series, User Manual

Page: 14 / 123

MTG1000B Trunk Gateway User Manual
MTG1000B Trunk Gateway User Manual
7
Copyright @ 2011-2015 Dinstar
2
Quick Installation
2.1 Preparations before Installation
2.1.1 Attentions for Installation
The attentions for installing MTG1000B include:

To guarantee MTG1000B works normally and to lengthen the service life of the device, the humidity of the
equipment room where MTG1000B is installed should be maintained at 10%-90% (non-condensing), and
temperature should be 0
℃
~ 45
℃
;
 Ensure the equipment room is well-ventilated and clean;
 Power supply of MTG1000B should be 100 ~240V AC, and its socket is a three-pin socket which should be
grounded well;
 Please wear anti-static wrist strap when installing MTG1000B;
2.1.2 Preparations about Installation Site
 Equipment Cabinet
Ensure the cabinet is well-ventilated and strong enough to bear the weight of MTG1000B. It’s required that
the width of the cabinet should be 482.6mm (19 inches).
 IP Network
Ensure Ethernet PBX or router under IP network has been prepared, since MTG1000B is connected to the IP
network through the standard 10/100 network port.
 Socket
Ensure the socket of MTG1000B is a three-pin socket and power supply is grounded well.
2.1.3 Installation Tools
 Screwdriver

Anti-static wrist strap

Network cables, power cable, telephone wires

Hub, telephone, fax, and PBX