29 | Chapter 1 : DVR User Manual
Select DAYLIGHT SAVING and select the appropriate daylight saving time zone.
The options are:
-
OFF: Daylight saving is turned off.
-
USA: Applies the USA daylight saving time.
-
EU: Applies the EU daylight saving time.
-
OTHERS: If the time zone is neither USA nor EU, set the date and time of the
daylight saving period.
3.
LANGUAGE
Select the display language.
4.
REMOTE ID
Select an ID of remote control.
-
Select ID number.
-
Press the same number as ID set in DVR on the remote.
5.
VIDEO SIGNAL
Shows the video resolution of each camera connected to DVR.
6.
IP ADDRESS
Shows the current network address of DVR.
7.
MAC ADDRESS
Shows the DVR’s unique Mac address.
8.
KEY TONE
Enable or Disable the key tone for button operation on the front or IR remote controller.
9.
VIDEO OUTPUT(HDMI/VGA)
Select the Video output resolution from the following options:
-
1280x720p/1920x1080i/1920x1080p/1280x720p(DVI)/1920x1080i(DVI)/1920x108
0(DVI)
-
DVI (Digital Visual Interface) is for monitors that use DVI signal format.
10.
F/W VERSION
Shows the current firmware version installed on the DVR.
11.
SYSTEM UPGRADE
Users can easily upgrade the DVR via USB or Network (Remote Upgrade).
a.
Create a new folder named “upgrade” in the USB flash drive root directory.
b.
Copy the firmware upgrade files to that folder.
C
AUTION
If using OTHER daylight savings, do not set the start time to 23:00 for DLS.
DLS cannot be applied if the date of BEGIN and END is the same.
